See vKNX at work.
The installation view, the floor plan, the devices and the telegram monitor in version 0.16. Click a picture to see it larger.
Your installation at a glance
-
Installation
The topology, every device with its address, and a checklist for each step in ETS.
-
Add a device
Choose a product from the catalogue, one or several at a time.
Operate it where it sits
-
Floor plan
Your own drawing with live symbols: lamps, dimmer levels, blinds, sensors and buttons you can press.
-
Operate from the plan
A click on a symbol opens the device’s operating card, here a light control with a colour wheel.
-
Edit the plan
Select several symbols, align or distribute them, and undo.
Operate the devices
-
Operating cards
All devices as cards that show their state and can be operated.
-
Push buttons
Keys with their group addresses and status, and a slider for brightness.
-
Switch actuator and sensor
Output states with group addresses, and the values of a multisensor.
-
Dimmer and blinds
Dimming level per channel and the position of each blind.
-
Light control and colour
The info display as a light control, and a colour dimming actuator with RGB and tunable white.
-
Presence and energy
A presence detector with follow-up time, and an energy meter with a load limit.
Programmed from ETS
-
ETS project
The virtual devices in an ETS project.
-
Download from ETS
Address and application downloaded to a vKNX device.
Trace and share
-
Telegram monitor
Who sent what to which group address, and the value.
-
Share an installation
Export a finished installation as a .vknx file, or open one from someone else.